Since the display screen of iPhone 6 plus has been enlarged to 5.5 inches, the possibility of breaking it has also been enlarged. If sadly you broke your iPhone 6 plus display screen, official restore will value you as much as every week exclude the time you make the appointment. So if you're expert enough, changing the iPhone 6 plus damaged display yourself is a better alternative. Here we are going to walk you through a 5 minutes DIY repair guide for replacing the broken iPhone 6 plus broken display.

Cracked the iPhone 6 display screen? No worry! Just observe this step by step iPhone repalce display 6 display substitute guide, it's solely a ten mins work!

Please word: This course of was achieved by our specialists who have years of experience of take apart telephones, and we used the part which already have these small parts pre-assembled. This put up is certainly not a reference for those who are skilled enough to repair their iPhone 6+, do this at your individual risk, etradesupply is not going to be accountable for any injury happened throughout the repair process.

Tools Needed:
Pentalobe Screwdriver
PH00 Philip Screwdriver
A Pair of Tweezers
Suction Cup Device
Case Opening Device

Step 1. Shut down your iPhone 6 plus earlier than you do anything else. (Make sure you’ve executed this earlier than the disassembly begins, or chances are you'll cause quick circuit of the internal elements of the cellphone which can hurt the motherboard)

Step 2. Undo 2 screws on the bottom with the help of the Pentalobe Screwdriver. (We recommend you to use a magnetic pad for putting those screws in case dropping them)

Step 3. Stick the suction cup on the bottom of the phone after which pull out the broken screen. (If your display has already shattered badly, use transparent adhesive tape to cover the surface of the display screen to avoid any further harm)

Step 4. Undo 5 screws holding the metallic cowl, then take the steel cowl out.

Step 5. Disconnect the digitizer flex cable connector, LCD display flex cable connector, front dealing with digicam connector and house button flex cable connector. (If what you get is the iPhone 6 plus digitizer and LCD display meeting with house button, body and entrance facing digital camera, then you just want to put the brand new one on)

Step 6. Undo the 3 screws holding the home button retaining bracket then choose it up.

Step 7. Pry up the home button flex cable connector then remove the home button.

Step 8. Undo the 3 screws that holding the metallic cover on the ear speaker.

Step 9. Take out the retaining bracket, ear speaker and entrance going through digicam.

Step 10. Undo the 7 screws that locking the LCD metal plate.

Step 11. Pry up the LCD again plate connector.

Step 12. Exchange your broken display screen with the new one.

Observe: We strongly recommend you to check the operate of the brand new iPhone 6 plus digitizer and LCD display meeting earlier than you set up it on. For those who sadly get the defective part, you can ask your provider to trade for a brand new one.